6 Wheel ADD ON Trailer Kit (No Monitor)

Model: TD-RY2700F-X06

  • Sale
  • Regular price $549.00
Free Shipping.


The TYREDOG™ TD-RY2700F-X06 (6) Wheel Trailer kit Add-On enables you to upgrade your existing TD-2700F-X kit so you can monitor additional Tyres on your vehicle/trailer. No Monitor is included in this kit.


These kits are only suited to the TD-2700F-X Series kits which contain a Relay.
They program into your existing TD-2700F-X kit, then simply mount the relay, fit the sensors and change and program the vehicle layout on your Monitor.

What's included

1 x Relay / Repeater unit (inc 4 x AA Batteries, Power Cable and Mounting Hardware)
6 x Wireless Sensors (inc 6 x CR1632 Batteries)
6 x SecureFit Rings


Note: You can upgrade this Add-On Trailer Kit to 8, 10 or 12 Sensors by simply ordering then programming in additional LEARNABLE Sensors.
(Refer to Spare Parts / Replacement Sensors Section)

 

*Specifications subject to change without notice.

 

Sensor Specifications

Frequency 433.92 Mhz
Pressure Range 0-180 PSI
Accuracy

Pressure: ± 3 PSI - Temperature: ± 2 Deg °C

Operating Voltage 3V (CR1632 Replaceable Battery)
Operating Temperature -40 to 125 Deg °C
Operating Humidity 100%
Battery Life Approx. 12 Months
Dimensions 20.5mm Diameter / 20mm height
Weight 10g (±1) / 13g (±1) inc battery

 

Relay Specifications

Frequency 433.92 Mhz
Operating Voltage 12V/24V DC (via supplied cable) or 4 x AA Batteries
Max. Power Consumption 33.1mA(12V) / 17.21mA(24V) 
Battery Life Approx. 12 Months
Operating Temperature -40 to 85 Deg °C
Operating Humidity 100%
Dimensions 105mm(L) x 85mm(H) x 50mm(D)
Weight 200g

 

Warranty

Warranty 2 Years

 

 

TD-2700F Owner's Manual
TD-2700F Programming Replacement Sensors
TD-2700F Programming Additional Sensors (Expanding your kit)
TD-2700F Changing and Saving Vehicle Layout
TD-2700F Replacing a Relay
TD-2700F Replacing a Monitor

 

 

Are the Sensors Water and Dust Proof and will they handle river crossings?

Yes, the TYREDOG™ wireless Sensors have been designed to be externally completely sealed. 

This means they are Water, Dust and Mud Proof and river crossings will not be a problem.

Just be sure they are rinsed off after entering any salt water.

Each Sensor has a rubber Seal which prevents water, condensation, dirt, dust and mud from damaging the device.

What is the estimated battery life and where can I purchase them?

External Type (X) Sensors - The Estimated Battery Life will be approximately 1 year. It all depends on how often or how many hours the vehicle is used and the quality of the battery. 
Each sensor contains 1 x 3V CR1632 Battery. The cost of a replacement battery will range from $3 to $6 and are available from most supermarkets and leading electronic stores. Alternatively you can purchase them through our website in the Spare Parts Section.

TDA-4C / TD-1XXX series Monitor / Receiver - The Estimated Battery Life depends on the model of your kit and also depends on how often the device is being used. Generally up to 12 Months for standard LCD screen passenger vehicle models (TDA-4C/TD-1000A). For all other colour screen models, the monitors must be powered by the 12v cigarette lighter plug. The colour monitors only require batteries for programming purposes if you need to take the monitor out of the vehicle. If using batteries, the colour monitor will switch off 30 seconds after the last button press. 

The Monitor / Receiver will contain 2 standard AAA or AA batteries (Depending on the model).

TD-2XXX series Monitor / Receiver - The TD2700F models are required to be powered by the supplied 12V/24V cigarette lighter adapter. The monitors only require batteries for programming purposes if you need to take the monitor out of the vehicle.


The TDA-4C, TD-1XXX and TD-2XXX series all come with a DC adaptor which can also be used the power the Monitor / Receiver. (Note: TDA-4C, TD-1XXX are compatible with 12V DC only where as the TD-2XXX series is 12V/24V DC compatible)

The Sensors look easy to steal, can they be secured?

Each kit contains a SecureFit fixing ring which once installed will help prevent Sensor theft.
Due to the small and compact size of each Sensor, they are not really a target for theft as they look very similar to an ordinary valve cap.

What should the Low Pressure, High Pressure & High Temperature alarms be set to?

Alarm Thresholds can be set for each axle meaning you can set different values for the front and rear tyres if required.

Low Pressure Alarms we recommend setting this at around 10-15% below your Cold Tyre Pressure.
High Pressure Alarm we recommend setting this at around 20-25% above your Cold Tyre Pressure.
High Temperature Alarm we recommend setting this at 70 Deg C.

Please refer to this Table below for some recommended settings which can be used as a guide for setting your thresholds.

Vehicle Cold Tyre Pressure - PSI

Unit Settings

Low Pressure Alarm - PSI

High Pressure Alarm - PSI

High Temp. Alarm - Deg Celsius

30

25

37

70

32

27

40

70

34

29

42

70

36

31

45

70

38

32

47

70

40

34

50

70

42

36

52

70

44

38

55

70

46

39

57

70

48

41

60

70

50

43

62

70

55

47

68

70

60

52

75

70

65

55

80

70

70

60

88

70

75

64

94

70

80

68

100

70

85

72

106

70

90

76

112

70

95

80

118

70

100

85

125

70

105

90

130

70

110

95

138

70

115

100

143

70

120

100

150

70

 

Can I replace a lost or damaged Sensor?

Yes you can order and program replacement LEARNABLE sensors for the complete range of TYREDOG™ products.

Each unit has a learning mode which allows the user to program in new replacement LEARNABLE sensors.

When ordering replacement Sensors, you must ensure you order the correct Sensor to suit your model, sensor type and the correct Wheel Position must be ordered. Sensor type is determined by removing the battery cover and battery then checking the colour of the label underneath where the battery is normally positioned. 
For Example:  If you require a new Sensor Number 2, then you must order a Sensor Number 2.
Replacement LEARNABLE sensors are available for each tyre location.

Go to the Spare Parts section on this site to find the complete range of available Sensors.

Why isn't one or more of my sensors working?

If any one of your sensors stop working, please remove the battery from that sensor and replace with a battery from a known working sensor.
Providing the monitor is on, as soon as you insert the known working battery, the sensor should come online.
If this fixes your problem, then you'll need to purchase a replacement battery.
If this doesn't fix the problem, then you will need to contact us or your place of purchase so the problem can be resolved.

Sensors working intermittently on Relay kits (TD-2000A-X/TD-2300A-X/2700F-X)
Firstly please make sure the relay has been mounted outside & underneath the vehicle. If the relay is mounted inside the vehicle or under a bonnet, your device may work intermittently. It will need to be repositioned to outside the vehicle. Check Sensors are within range of the relay. 

If this doesn't fix the problem, then you will need to contact us or your place of purchase so the problem can be resolved.

How do I inflate or deflate the tyres once the Sensors have been fitted?

If the SecureFit rings have been fitted, using the allen key tool supplied, simply loosen the SecureFit Ring then unscrew the sensor. If the SecureFit rings are not fitted then the sensor simply unscrews and you can then inflate or deflate your tyres.

If the optional 3-way valve has been fitted, then you simply remove the valve cap on the 3-way valve and inflate / deflate your tyres as normal. (There is no need to remove the sensor if the 3-way valve is used - These are only suitable for Trucks and Buses or vehicles which contain a deep dish rim and metal valves.

How do I know if the batteries are going flat?

The TYREDOG™ wireless Tyre Pressure and Monitoring system monitor / receiver will show a battery Icon for both the Monitor and the individual Sensor when it's time to replace the battery.
Once the icon appears, we suggest that you replace the appropriate battery within a few days. This will ensure your tyres are always protected.

What is the maximum transmission range for the sensors?

Transmission range is around 20-30 metres line of sight. However as the sensors transmit via Radio Frequency, the vehicle shape, size of the vehicle and the metal structure reduces this range to 5-10 meters (less than 5m for internal type sensors). Sometimes more, sometimes less. This is why the passenger vehicle models are not suitable for towing applications.

To increase the transmission range, the TYREDOG™ TD-2700F-X Series contains a Relay / Repeater Module.
This module is required for Trucks, Buses, Motor Homes, Heavy Duty Vehicles and Vehicles with a Trailer or Caravans.
The Relay / Repeater module must be mounted within 5-10 metres range of the Sensors (closer the better) but the Relay/Repeater can be up to around 60-80 metres away from the monitor / receiver.